SECURE LOCKING JEWELRY SYSTEM'S
                                                         

                                                                         

                                                                                   Scroll down to see our secure locking jewelry

If your browser is not showing the picture, please hit your refresh button

 

“Lori Lancer/Lancer Enterprise’s designs and concept of securing a chastity device with any type of genital piercing is patented through the USPTO. Should an infringement occur, all legal means will be pursued to protect Lori Lancer/Lancer Enterprise’s legal rights. Any infringement will cause irreparable harm. Damages would be significantly difficult to quantify. Therefore, any individual, corporate entity or other business infringing on the aforementioned design and concept shall be sued in the amount of $10,000.00 a day for the period of the infringement.”


ALL OF OUR SECURITY LOCKING JEWELRY SYSTEMS ARE MADE FROM 316L STAINLESS STEEL. CURVED UNITS ARE AVAILABLE IN: 1-1/8"dia., & 1-3/8"dia.. STRAIGHT UNITS ARE AVAILABLE:  1"dia., 1-1/8"dia., 1-1/4"dia., 1-1/2"dia. THE SECURE LOCKING JEWELRY SYSTEM REQUIRES PRINCE ALBERT, FRENUM, AMPALLANG, OR APADRAVIA PIERCINGS'.

All Pierced LOCKING Jewelry Units are shipped USPS Priority Mail, Signature Required

Orders outside the Continental United States add: $25.00 for shipping and handling.

IF YOU WOULD LIKE TO ORDER one of our pierced jewelry SYSTEMS SEND ME A E-MAIL FOR DETAILS ON HOW TO MAKE PAYMENT. WE REALIZE OUR PIERCED LOCKING JEWELRY DEVICES ARE EXPENSIVE AND IF YOU NEED TO MAKE PAYMENTS WE CAN ARRANGE THIS. Questions you can e-mail me at :
chastity4u2@yahoo.com


Informational Reading and links click    " HERE"

All of the pierced locking jewelry shown below are made to measurements that are submitted by you. For help figuring out how to measure see the link below. All jewelry is made from 316L Stainless Steel. Other devices that you see on the internet that state they are made from Stainless Steel use 304. The 304 has a tendency to rust where the 316L does not.
 

                                             See the newest creation's - "Wedding Ring" Number 13 and Number 10 "The Spike Spanker"


                                                                                               For order form click      
"HERE"


                                                                                      Informational Reading and links click "HERE"

                                                                              Looking for a item that may be in stock? Click  
 "HERE"

                       After selecting your secure locking jewelry, go to my Toy Store and get him to purchase you a new toy to tease and deny him.

                                                                                                       
Lori's Toy Store

 

 

  #1 -New Style of Secure Locking Jewelry. Unit shown here is "O" gauge, but can be ordered in any gauge. Can be ordered with or without the spikes. The device secures by a recessed stainless steel security screw. Cost: $600.00

     #2 is the all new design for the non-pierced, has 4 spikes, 2 on top, 2 on bottom.  Cost: $350.00 If wanting recessed security screw, add: $30.00 to the cost of the unit.

  P/A pin.  The P/A pin is new from Paulie's shop. Makes a non-pierced device work with a P/A piercing. Works on all CB2000 devices. Secure any device with a P/A piercing. Available in 316L 8 ga, or 6 ga.  Cost: $100.00

  #3- Frenum, Available in  1", 1-1/8", 1-1/4", 1-1/2" I. Cost: $450.00

  #4 - Curved P/A with hood. Available in :  1-1/8"dia., & 1-3/8"dia. Cost: $450.00

  #5 - P/A or Frenum piercing, hooded. Available in 1" dia., 1-1/8" dia., 1-1/4" dia., 1-1/2" dia.. Cost $450.00

#6. Slightly curved with locking security ring. The ring helps hold the pierced jewelry unit up on the shaft and keeps the pierced jewelry unit from riding down on the piercing. Unit comes in P/A . Available in : 1-1/8"dia., & 1-3/8" dia. Cost: $530.00. Unit shown here is with extra bars. Add $50.00 for the extra bars.

 #7- P/A, straight, hooded, locking security ring. Available in  1", 1-1/8", 1-1/4", 1-1/2" I.D. Add $50.00 to the cost for extra bars if you want them. Specify when ordering. Cost: $530.00

  #9, all stainless steel, high security recessed lock. Frenum, Prince Albert, Ampallang and Apadravia piercings. Available in slightly curved or straight models. $750.00

    #10, "The Spike Spanker".  Now offering a device for those who like to be spanked. Open top leaves flesh exposed. Available in all tube sizes. Number of spikes will be determined by your size. Available in P/A, Frenum, Apadravia, Ampallang piercings and for the non-pierced. Hood option is available, add $50.00. Hood model is recommended for P/A security. Non-pierced is $350.00. Pierced cost is $450.00.

To measure for the number 12 device you can go to the hardware store and purchase rings in the sizes near what you think they should be. See what fits you the best.  Include your type of piercing and the gauge of piercing you have if any.

  #12, Frenum Version.. How it works: The whole package is placed thru the big ring and then the members head is slid thru the small ring over 2 fixed dulled quarter inch spikes. The Frenum pin is locked on the side by a high security non-pick able lock. This makes a discreet secure package for use under clothes. Custom made to your size specified by you. Cost: $470.00.

  #12A - P/A Version. How it works: The whole package is placed thru the big ring and then the members head is slid thru the small ring over two (2) fixed, dulled quarter inch spikes. The P/A pin is locked on the side by a high security non-pick able lock. This makes a discreet secure package for use under clothes. Custom made to your size specified by you.  Read the review    "Here". Cost: $470.00.

  #12C, New Hooded version of the #12A. Cost: $550.00

  #12D, Hooded version of the 12A. Locked with recessed special locking screws. Takes special wrench to open. Cost: $625.00.


#12E. Secure Locking Jewelry shown here is for the non-pierced, available in Frenum and Prince Albert. The jewelry is installed same as the other Model 12 but has a shield between the rings, shield no longer hinges, it is now removable. Closes and secures w/recessed special screw. Spikes are put in the shield.  Cost: $650.00. If wanting a Frenum or Prince Albert piercing add $100.00.

#12E with P/A and removable shield.  A device like this is $750.00

  #12E, P/A, removable shield and extra bars. A device like this is $800.00.

       #13A - Wedding Ring, 8 ga, Frenum, This unit is measured from the base to the front. First ring is 1-3/8, middle ring is 1-1/4" head ring is 1-1/8" on this device that is shown. Device will be made to your measurements. Cost: $250.00

  #13B - Same as 13A only this unit has 2 settings for Frenum piercing. Cost: $300.00

   #13C, for the un-pierced, available in Frenum or PA piercing. Device is light weight, Device is made to your custom sizes. Cost: $350.00. For pierced model cost is: $375.00, If wanting recessed security screw, cost will be $400.00

  #14, Jewelry has bars on hood, for Frenum or for the un-pierced. Cost: $285.00.

  # 15 - Spiral, Frenum piercing. 8 ga. minimum. This unit cannot be seen under clothing. Very lightweight.  Cost $250.00.

  #16 - Ampallang piercing. The locking security ring helps hold the jewelry unit up on the shaft and keeps the unit from riding down on the piercing. Cost: $530.00. Available in :  1" dia., 1-1/8"dia., 1-1/4" dia., & 1-3/8" diameter.


  #17 - straight, Apadravia piercing, hooded, locking security ring. Available in 1", 1-1/8", 1-1/4", 1-1/2" I.D. Cost: $530.00

  #18A, P/A piercingAvailable in 1", 1-1/8", 1-1/4", 1-1/2, 1-3/8" I.D. Cost: $650.00. If wanting recessed security lock, add $100.00.

  #18B, Frenum piercing. Available in 1", 1-1/8", 1-1/4", 1-1/2, 1-3/8" I.D. Cost: $650.00

  #19 - Tube Tender. Cost: $25.00.

 


When giving your measurements be sure that they are in American measurements.

To convert Euros or any other type of money use this:  "U S Currency Converter link"

For more information and links click here   
"HOME"

To see what piercing jewelry we have in stock, click  
"HERE"

See Picture's of the latest units at  
"CREATIONS"



Effective January 1st, 2008 Free Shipping within the Continental United States. Outside the Continental United States add $25.00 for shipping and handling.


YOUR ORDER "WILL NOT" BE PROCESSED UNTIL PAYMENT IS RECEIVED.
MAKE SURE YOU REALLY WANT TO ORDER AS NO REFUNDS WILL BE MADE UNDER ANY CIRCUMSTANCES.

Want to Make Payments?
We can arrange 3 monthly payments

E Mail for more information

You can pay for your order by credit card, e-check, money order, cashiers check or personnel check, (if sending personnel check, order will not be processed until check clears). E-mail for information on how to pay by using credit card or e-check. No personnel checks accepted from outside the United States.

Click here to e-mail me:
chastity4u2@yahoo.com   with any questions you may have, be sure and put unit number you are inquiring about.

When sending a email please indicate what you are inquiring about in the subject line, otherwise it will go into my spam folder.

"HOME"


“Lori Lancer/Lancer Enterprise’s designs and concept of securing a chastity device with any type of genital piercing is patented through the USPTO. Should an infringement occur, all legal means will be pursued to protect Lori Lancer/Lancer Enterprise’s legal rights. Any infringement will cause irreparable harm. Damages would be significantly difficult to quantify. Therefore, any individual, corporate entity or other business infringing on the aforementioned design and concept shall be sued in the amount of $10,000.00 a day for the period of the infringement.”